Autoclave and oven racks take up space and can limit the size and quantity of tools that can be processed together.
Torr can configure tools with legs and receptacles that allow them to stack, taking the place of a conventional table
This group of autoclave tools has a cart that serves as the base. Each tool has forklift pockets and large receptacles
and legs. These tools also work good with manual stackers, both hand/foot powered and electric. These particular tools
have vacuum ports and thermocouple connections installed in the plate and routed to panel connections on the ends.
This set of 5 double-diaphragm tools has a bottom cart structure. Each tool has an upper and lower diaphragm/frame
assembly. Vacuum ports are installed in the lower diaphragm and routed to a panel connection.
Even small ovens or autoclaves can be accommodated. This tool has an aluminum baseplate with a vacuum and thermocouple
port in the diaphragm. The diaphragm vacuum port is routed to a horizontally mounted bulkhead fitting on the frame to
accommodate the hose and quick-disconnect. Whenever possible, vacuum connections are installed on the frame to protect